Hello all - I am banging my head against the wall with this iSCSI connectivity issue with a production Hyper-V cluster. I have 3 production nodes already connected to an HP P2000 SAN using MPIO on the iSCSI NICs. I am adding a fourth node for additional capability and because one of my current production nodes had a hardware failure and want to ensure we have adequate resources. Here is the issue, I have configured the additional node identically to the other 3 nodes and the CSV LUN and Quorum LUN show as RAW file system when I bring them online. I have gone through the iSCSI initiator a number of times to ensure that all the settings are identical to my other 3 production nodes. Any thoughts or recommendations to why it would show a RAW file system instead of NTFS? Any ideas or recommendations would be greatly appreciated.
John