OK, i'm testing NLB. It's for a RDS farm, not sure if i should post here or there.....
I discovered there's a command line thankfully. I get the following results and I'm not sure about the DedicatedIPAddresses line:
C:\Windows\system32>nlb display 192.168.1.40
NLB Cluster Control Utility V2.6 (c) 1997-2007 Microsoft Corporation.
=== Configuration: ===
Current time = 3/12/2013 3:32:57 PM
ParametersVersion = 6
CurrentVersion = V2.6
EffectiveVersion = 00000201
InstallDate = 0x513EB28E
HostPriority = 1
ClusterName = nlb.domain.local
ClusterIPAddress = 192.168.1.40
ClusterNetworkMask = 255.255.255.0
DedicatedIPAddresses/ = 192.168.1.31/255.255.255.0
DedicatedNetworkMasks
McastIPAddress = 0.0.0.0
ClusterNetworkAddress = 03-bf-c0-a8-01-28
IPToMACEnable = ENABLED
MulticastSupportEnable = ENABLED
IGMPSupport = DISABLED
MulticastARPEnable = ENABLED
MaskSourceMAC = ENABLED
AliveMsgPeriod = 1000
AliveMsgTolerance = 5
MaxConnectionDescriptors = 262144
FilterICMP = DISABLED
ClusterModeOnStart = STARTED
PersistedStates = NONE
NBTSupportEnable = ENABLED
UnicastInterHostCommSupport = ENABLED
BDATeaming = NO
TeamID =
Master = NO
ReverseHash = NO
IdentityHeartbeatPeriod = 10000
NumberOfRules (1):
VIP Start End Prot Mode Pri Load Affinity
--------------- ----- ----- ---- -------- --- ---- --------
ALL 3389 3389 TCP Multiple Eql None
=== Event messages: ===
Could not open event log due to:
The operation completed successfully.
Please if something looks out of whack just say so, but I'm looking for info on the DedicatedIPAddresses section. I have 3 nodes in this cluster, 192.168.1.31-33 but only the first node 192.168.1.31 is listed. Is something incorrectly setup or is this just how it's displayed?
Thanks!