Cluster IP address fails with error 1077
Hi all,I have a windows 2012r2 failover cluster and recently I noticed that the cluster name is offline due to a failure of its IP Address:Health check for IP interface 'Cluster IP Address' (address...
View ArticleFailover on 2008R2 Fileserver cluster takes 7 minutes when a server reboots...
I have a 2008R2 domain with (2)2008R2 nodes in a cluster. I have 2 questions1. If I "validate the cluster" and it is a cluster with several 10TB disk on it, etc. will it take a long time to validate?...
View ArticleQuery on Multi-subnet Failover Cluster Setup
I have setup Failover Cluster Instance on 2 nodes with Windows Server 2008 and SQL Server 2012 running on a SAN storage with "Node and Disk based Quorum", DTC and public and Private IP...
View ArticleInternal netbios traffic on WSFC 2012
All hello. Current configuration: SQL Server of group of availability (AG) 2012 on Windows Server 2012 consisting of two nodes is developed. On each node two network interfaces, one for public access,...
View ArticleRecovery steps for a failed single-JBOD SOFS cluster
Just wondering here.So a single, sole JBOD goes down which is connected to 2 SOFS nodes.What are the options for quickly spinning up the VMs that resided on the JBOD?The Hyper-V cluster cannot access...
View ArticleWindows 2003 Cluster Domain / Change - Request off domian
Hello. This is sort of a weird question. We have a customer that had a two node cluster. The customer was originally going to move their cluster to a new domain. Before they contacted us, they...
View ArticleMulti-site cluster with different connections
Hello,At the moment we have a sql 2014 cluster in one datacenter where all of our customers connect toIn the near future we are going to expand to a second datacenter and we want to move 1 node to this...
View ArticleUnable to validate Server 2012 Failover Cluster - Node communication problem.
I thought I had posted this, but the system appears to have eaten it. I will try again.I am setting up a 2-node Server 2012 Failover Cluster. I have installed the tools on each server, and I have...
View ArticleHelp in creating first Windows Failover Cluster
This is my first attempt in creating a failover cluster. I've followed the instructions on "Failover Cluster Step-by-Step Guide: Configuring Accounts in Active Directory" along with the required ports....
View ArticleOption "Continuous Availability" on File Share on 2012 R2 "General Use" File...
Have a "General Use" Fileserver clustered on two 2012 R2 Cluster Nodes. When creating file shares in the failover cluster manager, I have the option to tick "Continuous Availability" in the settings of...
View ArticleWindows NLB - Multicast
Hi, I configured windows NLB in multicast mode and gave the MAC to network team for adding a static ARP entry in switches, i am wondering whether this MAC id is dynamic or it will stay the same untill...
View ArticleAdd Node to Cluster - Keyset does not exist
Hi, I am trying to add third node to a Windows 2012 fail over cluster, but gets the following error.The server 'DR.domain.com' could not be added to the cluster. An error occurred while adding node...
View ArticleClustered Task giving RPC Server unavailable error
Hi everyone, I have a clustered environment with SQL AlwaysOn. When I try to create a clustered task using powershell using this command, I get an error Register-ClusteredScheduledTask : The RPC...
View ArticleSome or all CSVs will Fail Only on the Weekends. They work just fine during...
Good afternoon,There is a problem which I have noticed only occurs during the weekends. The problem: All or just some CSVs go into the offline state only on the weekends and this of course brings down...
View ArticleSharepoint Website responding very slow, using windows server 2012 Network...
Hello Team,Greetings for the day!I have 2 Windows server 2012, with Network Load Balancing role enabled on it, on both the server sharepoint 2010 R2 (Sharepoint Farm) is installed. I have enabled...
View ArticleFail to bring file server role online
I have add the file server role on the cluster(server 2012). But cannot bring it online. I have the following error.Event ID 1254, 1205, 1069Event ID 1069The cluster service failed to bring clustered...
View ArticleClik here to view.
Definitive answer needed please - Validating Clustered Storage??
Hi,I am struggling to find a definitive answer as to how I can safely validate a windows server 2012 hyper-v failover cluster. The cluster passes all non-storage validation tests, but I need to run a...
View Articlevms on the cluster are not booting
Dear all,I have a 2-nodes cluster hosting 8 VMs connected to a QNAP TS-421U storage.I don´t know what happened but i got call telling me that all vms were down. I connected there and was true, all the...
View ArticleHyper-V Cluster 2012R2- I can see VM which are Offline using Get-VM after...
HiI use Microsoft Hyper-V Server 2012R2 (so without GUI) for all two nodes in cluster.I've got problem with manage VM after shuting down Hyper-V cluster (all nodes down) and turning it on.When I turn...
View ArticleCluster Shared Volume X has entered a paused stated because of '(c00000)9d).
We have two Hyper V 2012 R2 (HVHOST 1 and 2) servers both with Server 2012 R2. These servers communicate via ISCI over a Dell switch to a MD3200i. All the VM's live on a single CSV virtual disk.At...
View Article