i have a StrogeTek D280, and try to create a two nodes win2008 server fail over cluster, the validate failed with below message. what can i do to resolve this? i am using MPIO of STK.
anyone can help? thanks
Disk with identifier {9fae4368-6041-425b-ac2f-ca42cbd8da4a} has a Persistent Reservation on it. The disk might be part of some other cluster. Removing the disk from validation set
anyone can help? thanks
Disk with identifier {9fae4368-6041-425b-ac2f-ca42cbd8da4a} has a Persistent Reservation on it. The disk might be part of some other cluster. Removing the disk from validation set
Disk with identifier {c43066fa-525e-4695-85c0-d23eca0890a1} has a Persistent Reservation on it. The disk might be part of some other cluster. Removing the disk from validation set
Disk with identifier {2d60f4fb-9ccc-4003-8ae0-299eddf3af35} has a Persistent Reservation on it. The disk might be part of some other cluster. Removing the disk from validation set
Disk with identifier {bccf2548-c32f-4883-b41a-24d8f328ea15} has a Persistent Reservation on it. The disk might be part of some other cluster. Removing the disk from validation set
Disk with identifier {6c145213-9f43-421f-9afb-a51db19e0147} has a Persistent Reservation on it. The disk might be part of some other cluster. Removing the disk from validation set
No disks were found on which to perform cluster validation tests. To correct this, review the following possible causes:
* The disks are already clustered and currently Online in the cluster. When testing a working cluster, ensure that the disks that you want to test are Offline in the cluster.
* The disks are unsuitable for clustering. Boot volumes, system volumes, disks used for paging or dump files, and disks that do not use NTFS are examples of disks unsuitable for clustering.
* The disks are not visible to all nodes (even though they are in shared storage). Review the "List All Disks" test to see which disks are visible to all nodes. Ensure that the disks you want to test are unmasked, that is, your masking or zoning does not prevent access to the disks. If the disks seem to be unmasked or zoned correctly but could not be tested, try restarting the servers before running the validation tests again.
* The cluster does not use shared storage. A cluster must use a hardware solution based either on shared storage or on replication between nodes. If your solution is based on replication between nodes, you do not need to rerun Storage tests. Instead, work with the provider of your replication solution to ensure that replicated copies of the cluster configuration database can be maintained across the nodes.
No disks were found on which to perform cluster validation tests.