I am attempting to create a new cluster on 2012.
My configuration is setup as follows.
Central ISCSI SAN on dedicated iscsi network.
2 nodes, with 2 nics in each node for iscsi, and one nic for domain traffic ( will add more later but not important right now )
The problem i am having is network validation shows a warning when setting up the cluster and only tries to communicate over one of each nodes ISCSI nics and not both
the error is as follows.
The communication path between network interface server1 - ISCSI NIC PORT 2 and network interface server2 - ISCSI NIC PORT 1 is on a disabled network.
each iscsi NIC has a different IP address on the same subnet, this subnet is seperate from normal domain traffic, there are no default gateways on the iscsi NICS.
i can setup the cluster as is fine and everything works, but it doesnt show both iscsi nics for both nodes, only one of each.
any help would be great, finding information on 2012 clustering has been difficult at best.
cheers